Jetting for IAME Leopard & X30 (com.isenet.jettingforiameleopardx30) on Google Play
Jetting for IAME Leopard & X30 Kart is an application which provides, for the current weather conditions and a given engine configuration (engine model, gas, etc.), a jetting and exhaust length recommendation for IAME Parilla Leopard RL & X30 engines.In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.The application is made up of four tabs that are described next.- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine. - Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setups will be adapted.- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity). The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.If you click in "More from developer" you can find other karting apps from ISEnet:- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Birel, Intrepid, Formula K, Energy, OK1, etc.- Jetting Max Kart and Jetting for Rotax Max EVO, for Rotax Max, Micromax, Minimax, Junior, Senior, Supermax or DD2 gocart engines.- Jetting for Yamaha KT100, for Yamaha all-classes- Jetting TM Kart, for TM K9, K9B, K9C, KZ10 and KZ10B engines.- Jetting CR125 Shifter go-kart, for Honda CR125 powered shifters.- Air Density Meter: if you don't find a specific jotting app for your engine, you can use this app to create jeting charts.- ...We're working in a new apps for other kart engines (Maxter, Vortex, ...) , and a new app for Alfano / Mychron visualization.ERRORS AND SUGGESTIONS:Please understand that because of the variety of phones, android versions, operators, etc. it's very hard to develop bug-free applications. If you find any bug, please, send us an email to android@isenet.es explaining, as detailed as you can, the error that you've detected. We'll try to fix it or give an answer as soon as possible.PERMISSIONS:The application needs the next permissions:- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.- Storage: it's used for storing the configuration preferences.- Network communication: it's used for invoke the external service which provides the current weather conditions- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.