Jetting TM Kart for ICC / KZ (com.isenet.jettingtmkart) on Google Play
Jetting TM Kart is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc.), four jetting recommendations for go-karts with TM K9, K9B, K9C, KZ10 and KZ10B engines (ICC / KZ1 / KZ2 karting engines). In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must give the weather data.The application is made up of four tabs that are described next: - Results: in this tab, four different jetting setups are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. For each jetting setup, the following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits for each jetting setup to adapt to the concrete engine. - Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).- Engine: you should set in this screen the information about the engine and the carburator (usually Dellorto VHSH 30), that is, the engine model (K9, K9B, K9C, KZ10, KZ10B), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long). Depending of the track type, the jetting setups will be adapted.- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.If you click in "More from developer" you can find the other karting apps from ISEnet:- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Birel, Intrepid, Formula K, Energy, OK1, etc.- Jetting Max Kart, for Rotax Max, Micromax, Minimax, Junior, Senior, Supermax or DD2 gocart engines.- Jetting CR125 Shifter go-kart, for Honda CR125 powered shifters.- Air Density Meter: if you don't find a specific jotting app for your engine, you can use this app to create jeting charts.The app is not valid for Modena, Maxter, SGM, LKE or Vortex. We're working in a new apps for these engines, and a new app for Alfano / Mychron visualization.ERRORS AND SUGGESTIONS:Please understand that because of the variety of phones, android versions, operators, etc. it's very hard to develop bug-free applications. If you find any bug, please, send us an email to android@isenet.es explaining, as detailed as you can, the error that you\'ve detected. We\'ll try to fix it or give an answer as soon as possible.PERMISSIONS:The application needs the next permissions:- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.- Storage: it's used for storing the configuration preferences.- Network communication: it's used for invoke the external service which provides the current weather conditions- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.