Ghost Hunting Tools (com.weaseldev.ghostdetector) on Google Play
Detect and hunt ghosts and spirits with EMF meters and EVP detection. Ghost Hunting Tools makes use of a variety of sensors in your phone and gives your easy-to-use access to EMF meters and EVP detectors to detect and hunt ghost and spirits. The included EVP analysis with the over 1000 words strong dictionary analyzes to captured EVPs and in combination with the sensors for the EMF meter and other environmental reads, it will approximate the meaning and select the closest corresponding meaning.EMF meters are instruments that read the fluctuation in electromagnetic fields. This detector is a combination of different EMF meters and uses triple axis detection. It will detection fluctuations and anomalies in the electromagnetic field, using various sensors like the magnetometer built in your device. You may experience paranormal activity between 2 and 6 milligaus - the readout is calibrated on these parameters. The history graphs below the main readout are recording the strength, helping you tracking sources easier. If the readout indicates fluctuations in the field, we recommend slowing down and letting the app calibrate on the signal. If the signal is a false-positive, the strength will slowly decrease or increase if the fluctuation is permanent and less likely to be a wrong read.Note: Some devices will not support the triple axis mode and automatically switch to single axis detection. If you are able to use triple axis detection, the readings should remain in place, even if you rotate you device. Otherwise, make sure to not tilt the device too fast, to avoid false-positive readings.EVP, Electronic voice phenomena, are grunts, words, or even simple sentences caught on tape during recording sessions. Usually these phenomena can not be heard, since they mostly occur in certain ELF ranges. Together with the EMF detector, this detector will capture sounds through FM bands your devices microphone, analyze the audio and play back any anomalies detected. The graphs are indicating the base level of noise from FM bands and the microphone - if a anomaly has been detected, a second set of graphs will display the wavelengths. The audio file will be analyzed and in combination with the sensors for the EMF meter and other environmental reads, it will approximate the meaning and select the closest corresponding meaning from the built-in dictionary. The processing time can vary and depends heavily relies on your devices processor unit. Similar devices are used by paranormal investigators and can help to evaluate a spirits intention.We cannot guarantee accuracy or give any warranties, since the results cannot be scientifically verified. This application is therefore intended for novelty purposes only.